ImgWonders
  1. Homepage
  2. @tools_at_work
Austin (@tools_at_work) Instagram Profile Photo

tools_at_work

Austin

Everything tools for footers to finish on residential home build. Check hashtag for all reviews. Owner of @av_carpentry

https://youtu.be/gdx49PgFzag

Austin (@tools_at_work) Instagram photos and videos

List of Instagram medias taken by Austin (@tools_at_work)

Indian Hill, Ohio

Old harth coming out the @milwaukeetool 1 3/4” sds max made quick work of it. A little bit of tape on the kept the dust to a minimum. This rotary hammer is something that just 5 years ago I never thought was possible. It has exceeded my expectations. Keep in mind my expectations have been inadequate run time and not enough power. It’s got just as much power as any corded rotary that size. Smaller slabs bigger holes in concrete not a problem at all. Only bad thing is that I did get a 12.0 battery to go into thermal overload a few times but that was non stop running once while breaking up a slab. If you have a job that you are running it for 8 hours straight you definitely want to stick with a corded one still. Depending on the amount of holes or amount you are chipping up though 2 or 3 batteries can get the job done especially if you have to pick up the rubble every so often. This little harth only took one bar away. Vibration dampening is pretty good. It has a anti kick back feature on it which is nice when drilling holes, it won’t turn around and hit you but this feature should be automatically turned off in chipping mode several times I had it stop it when just chipping because I would pick it up to fast or turn it to fast. Also one last thing even with the battery it’s a fairly light unit compared to some other sds max rotary hammers this size. To find any specific tool review of mine past and present visit my profile and click on the hashtag in the description • • • • • • • • •

New YouTube video is up. Link is in my bio. Let me know what you guys think. To find any specific tool review of mine past and present visit my profile and click on the hashtag in the description • • • • • • • • • @milwaukeetool

@kc_tool had this @weratoolrebels 1/2” socket set on sale for their tool of the day sale earlier this week. It will be really nice to use a quality set like this to be wrenching on my ••••••••••••••

Indian Hill, Ohio

Here is a little sneak peek at the bathroom that I have been doing. Plenty more pictures to come check out my other page @av_carpentry for more pictures of finished work.

New gen 2 super hawg is coming. It’s faster and more powerful than the last one coming in August for 399 bare or 699 for the kit. Also new lineman tools. 2in1 Insulated Ratcheting Box Wrench, Lineman’s 4in1 Insulated Ratcheting Box Wrench, Lineman’s High-Leverage Ratcheting Wrench, and Lineman’s 5in1 Ratcheting Wrench. The Insulated Ratcheting Box Wrenches are the only 1000V insulated UL classified wrenches on the market. The Lineman’s 2in1 Insulated Ratcheting Box Wrench has both 9/16” and 3/4" sizes in one tool and the Lineman’s 4in1 Insulated Ratcheting Box Wrench has 1/2”, 9/16”, 5/8”, or 3/4. To find any specific tool review of mine past and present visit my profile and click on the hashtag in the description • • • • • • • • •

Indian Hill, Ohio

I sure most people have seen this or have done it but small patches like this you can’t beat a blow out patch. To find any specific tool review of mine past and present visit my profile and click on the hashtag in the description • • • • • • • • • ❤️tools @olfacuts

Indian Hill, Ohio

You ever see a jig saw blade do this? These are the @spyderproducts double sided blades that they sent me. I thought they were a little gimmicky until I tried it. You got to use it on no orbital mode but for coming out of those tight cuts this thing is pretty cool. To find any specific tool review of mine past and present visit my profile and click on the hashtag in the description • • • • • • • • •

Hyde Park, Cincinnati

How about some organization for today. Helping my dad with a project and this is his router box setup. It works very well. Everything all in one box, easy to access. To find any specific tool review of mine past and present visit my profile and click on the hashtag in the description • • • • • • • • • @boschtoolsna

Putting the @milwaukeetool stubby to work. It took off these old rusty 17mm bumper beam bolts on my gc8 no problem. I honestly didn’t think it would have it. To find any specific tool review of mine past and present visit my profile and click on the hashtag in the description • • • • • • • • •

New 2nd gen 18ga Brad nailer was announced today. It’s coming out next month. This seems to have fixed all the issues that the previous one had. It was just the demo at nps but I didn’t have one nail set proud the entire time I used it. Also the nose was a lot better. And this thing was considerably smaller and lighter. I not going to call it till I get one but I think this will be a winner. It will be 279 bare or 399 with a 2.0 battery charger and bag. Link in my bio to pre order if you want. To find any specific tool review of mine past and present visit my profile and click on the hashtag in the description • • • • • • • • • @milwaukeetool

New YouTube video up on both of the battery 23ga nail guns on the market. Link is in my bio To find any specific tool review of mine past and present visit my profile and click on the hashtag in the description • • • • • • • • • @makitatools @metabohpt

Indian Hill, Ohio

Using my cobras to put in this stubborn lock cylinder. The protective rubber tips you can get are nice for this stuff. No scratching of the polished nickel at all. These kind of pliers are super handy. Check out the smaller 7” gedore ones. They are almost half off at @kc_tool To find any specific tool review of mine past and present visit my profile and click on the hashtag in the description • • • • • • • • •

Officially announced today the new @milwaukeetool m12 surge. Same size of the gen 2 m12 impact but a lot quieter. Also same power as the m18 surge in a smaller package. It will be available in August for 149 bare tool or 199 for the kit. But if you preorder it from @acmetools this week and use code july4 you can get 10% off. Link is in my bio • • • • • • • • •

Pretty nice updated saw. @toolgirlsgarage with @get_repost ・・・ Another addition to the Hilti Concrete Cutting Lineup is the DCH 300 X- features a 12 inch blade, and can be used wet or dry for increased versatility- allowing it to be used for indoor or outdoor applications. Hilti offers a variety of Diamond Cutting Blades based on use case, and offers their 20-2-1 warranty. * * Shout out to Austin - @tools_at_work for being the demo model! * * * @hilti @hiltinorthamerica @tools_at_work

Indian Hill, Ohio

LOUD NOISES! To find any specific tool review of mine past and present visit my profile and click on the hashtag in the description • • • • • • • • •

Indian Hill, Ohio

How good is the @oneidaairsystems dust deputy? Really good. Save yourself from cleaning out that clogged filter. This is my set up for large volume tools like planers and table saws. To find any specific tool review of mine past and present visit my profile and click on the hashtag in the description • • • • • • • • • @dewalttough

These kind of packages are the worst to open. How many people have cut themselves trying to open one with a regular knife. With this @olfacuts safety knife that’s not really a worry. To find any specific tool review of mine past and present visit my profile and click on the hashtag in the description • • • • • • • • •

The next generation of systainers is coming. These look like a nice upgrade. Front handle a top handle that folds back or front and better vehicle integration. It’s compatible with all other systainers. I like the new clear lid organizer box. Hopefully more info will come soon To find any specific tool review of mine past and present visit my profile and click on the hashtag in the description • • • • • • • • • @festool @festool_usa @systainer_tanos_official

English Turkish